Format Your Drive

What Can You Do with Bootable USB Hard Drive Format Utility?

Almost everyone knows that formatting hard drives is not a difficult job and can be easily done with the built-in Disk Management tool in Windows. However, formatting a hard disk could be complex when your operating system cannot boot properly or your disk fails to work normally. That's when you need to create a bootable USB to format your hard drive. You can format hard drive from USB by using a bootable USB drive created by a third-party HDD format tool or a Windows installation disk. Both are effective bootable USB hard drive format utilities. Read on and carry out the method best suited to your needs.

Feb 08, 2012 To partition and format your drive, you can use Windows' built-in tool called Disk Management. You can repartition and format your hard drives in Windows using the Disk Management tool. May 29, 2020 Many users would like to format hard drive for a secondary use, and the situations varies from one to the other. For example, you may want to sell your PC to others. Even though you delete all the personal and sensitive data, you still unsure if it is completely cleaned. Hence, reformatting your hard drive is a must-do event.

Nov 27, 2020 If you format your drive with the following 3 methods, you can unformat disk and retrieve data from the hard drive. Format Hard Drive with Disk Management Disk Management can perform some simple disk and partition operations like create partition, delete partition, format partition, extend or shrink partition. Format your external HDD or SSD on your OS X machine (Image credit: Apple) If you need to use an OS X machine to format your external drive, head to Disk Utility. You can find this by opening a. With three different methods introduced to format hard drive in Windows 10, now you can choose one based on your actual requirements. If you format the hard drive with the purpose of protecting personal data from leakage, it is recommended that you use ' wipe partition ' feature of AOMEI Partition Assistant Standard.

Method 1: Format Hard Drive from USB with Bootable format Tool

The simplest way to format your HDD from USB is to use the professional partition management software - EaseUS Partition Master. With the assistance of this tool, you can create a bootable format tool that enables you to run the software on the problematic computer and then format the hard drive from USB without the operating system. To get things done, you need to create a bootable USB drive with a computer that is fully functional (Part 1), then apply it to format hard drive on the computer without OS (Part 2).

Part 1: Create a Bootable USB Drive

Please refer to this page: create a bootable drive with EaseUS Partition Master.

After creating a bootable USB drive with the format tool, you can format your hard drive on the problematic computer from USB. Connect the USB to your computer and then open EaseUS Partition Master from the USB. Then follow the steps below.

Part 2: Format Hard Drive from USB

Step 1: Run EaseUS Partition Master, right-click the hard drive partition you intend to format and choose 'Format'.

Step 2: In the new window, set the Partition label, File system (NTFS/FAT32/EXT2/EXT3), and Cluster size for the partition to be formatted, then click 'OK'.

Step 3: Then you will see a warning window, click 'OK' in it to continue.

Step 4: Click the 'Execute Operation' button in the top-left corner to review the changes, then click 'Apply' to start formatting the partition on your hard drive.

If you follow the guide above, you will use the bootable USB to format your hard drive successfully. Don't miss this partition tool that can perfectly fulfill your needs.

Method 2: Format HDD from USB using Command Prompt

Other than using the third-party tool, you can also format your hard drive from USB with the help of Windows Installation disk, which, as you will know, is relatively more complicated than using a bootable format tool as shown in Method 1.

Step 1: Create a Windows installation disk and boot your PC from it.

Step 2: Navigate Repair Your Computer --> Command Prompt.

Step 3: In the Command Prompt window, type diskpart and press 'enter'.

Step 4: Type list disk and press 'Enter' to list all the disk drives.

Step 5: Type select disk + disk number, here you can find the number of the target disk by referring to the listed disk information.

Step 6: Type clean to wipe all files and folders on the selected disk.

Step 7: Type create partition primary and press 'Enter'.

Step 8: After diskpart successfully created the specified partition, type format fs=ntfs (or format fs=exfat) and press Enter. You're telling diskpart to format the drive with a file system, let it be NTFS, exFAT, etc.

Step 9: At last, assign a drive letter to the newly created partition by typing assign.

The above guide shows you all the steps to partition and format a hard drive from USB using the diskpart command prompt. As you can see, It is a little bit tedious and time-consuming. If you want an easier way, a third-party bootable USB format tool will help.

Can You Format Hard Drive from BIOS?

Other than following the bootable USB methods to format a hard drive, you can also try to format a hard drive from BIOS. It works in the same scenarios when something went wrong with the bootable partition or when you want to format C drive in Windows.

To format hard drive from BIOS settings, you got two options.

Option 1. Boot into BIOS and Format in Windows

Step1: While booting up your computer, consecutively press F1, F2, F8 or Del key to enter BIOS settings.

Step2: Select the 'Advanced BIOS Features' by pressing the arrow keys on the keyboard of your computer and then set the first boot device as the USB drive or CD, DVD.

Step3: After changing the BIOS settings, you can exit the screen and reboot your computer. Insert the bootable USB or CD/DVD, and your computer will boot from USB or CD, DVD.

Step4: After booting the computer, you can go ahead to format the hard drive in Windows Explorer or Windows Disk Management.

Option 2. Boot into BIOS and Format Using CMD

Step 1: While booting up your computer, consecutively press F1, F2, F8 or Del key to enter BIOS settings.

Step 2: Change the boot order to boot from USB/CD/DVD.

Step 3: Reboot your computer from the bootable disk. When your disk loaded, click 'Use this recovery tools that can help fix problems starting Windows' and navigate to Windows installation > Command Prompt.

Step 4: In the Command Prompt window, type format c: /fs: ntfs and hit Enter.

Which Way Do You Prefer Formatting A Hard Drive?

Based on the situations when you cannot normally start a computer, the boot partition fails to boot, or try to reinstall an operating system, it's necessary to format a hard drive in a bootable environment. Concluding from what we presented in the article, you can start freely to format HDD from USB and format HDD from BIOS settings.

No matter you choose to format hard drive from USB or BIOS settings, you must create a bootable USB or disc to boot into Windows. In comparison, EaseUS USB bootable format software is the easiest to create, and disk formatting is usually done in a few simple clicks. Whereas the Windows recovery disk is rather difficult to get, and format hard drive using CMD is higher-leveled. We don't recommend average computer users to attempt for the first time.

If you need to format a USB flash drive, HDD, SDD, or some other form of storage to FAT32, you've come to the right place.

In this article we'll go over what a file system is, the FAT32 standard, and several ways to format a storage device to FAT32 on Windows 10.

What's a file system?

A file system is a standardized way of organizing data on a computer storage device like a flash drive or HDD.

A file system divides a storage device into virtual compartments, almost like a wall of post office boxes, and keeps track of all the information that gets stored in each box.

Some of the most common file system formats for portable storage devices are FAT32, NTFS, and ExFAT.

FAT32 compared to other formats

Of those three common formats, FAT32 is the oldest and most widely supported. Every major operating system will allow you to read and write from a USB flash drive that's formatted to FAT32.

Meanwhile, macOS can only read NTFS drives, and you would need to install third-party software to write back to the drive.

However, though FAT32 is well supported, its maximum drive and file size is severely limited when compared to newer formats like NTFS and ExFAT:

* 1 petabyte is about 1 thousand terabytes
** 1 exabyte is about 1 million terabytes

Note that the maximum drive and file size of NTFS and ExFAT is so large that there's basically no limit. (But it would be nice to have a 128 PB USB drive, wouldn't it?)

On the other hand, FAT32's max file size of 4 GB is almost nothing now that phones can record 4K videos. Also, it's a little more difficult to format a drive larger than 32 GB to FAT32 on Windows 10.

These days, the only reason why you'd choose to format a drive to FAT32 is for compatibility. For example, if you need to boot up an old computer, maybe with a different operating system, and backup some of its files. But you'd need to be sure that none of those files are greater than 4 GB.

If you're sure you want to go with FAT32, here's how to format a storage drive on Windows 10. Can you use your phone to play xbox one.

Important note: Before you format a drive, make sure that you backup all of your important files. In fact, make two backups, and keep one on a remote service like Google Drive or Dropbox.

Formatting a drive will delete all of the data that's currently on it.

How to use Windows File Explorer to format a USB drive to FAT32

A quick note about this method: it only works on USB flash drives that are less that 32 GB. If your USB drive is larger than 32 GB, check out one of the later methods.

With that out of the way, plug your USB drive into your computer and open Windows File Explorer.

Format Your Flash Drive To Fat32

Important note: Before you format a drive, make sure that you backup all of your important files. In fact, make two backups, and keep one on a remote service like Google Drive or Dropbox.

Formatting a drive will delete all of the data that's currently on it.

How to use Windows File Explorer to format a USB drive to FAT32

A quick note about this method: it only works on USB flash drives that are less that 32 GB. If your USB drive is larger than 32 GB, check out one of the later methods.

With that out of the way, plug your USB drive into your computer and open Windows File Explorer.

Format Your Flash Drive To Fat32

Next, right-click on the drive on the left hand side of the File Explorer window and click 'Format':

In the window that pops up, ensure that 'FAT32' is selected. Also, feel free to rename the USB drive whatever you'd like:

You can leave the rest of the options alone. Just click start to format your drive.

Once it's done, your USB drive should be formatted to use the FAT32 file system.

To double check this, open File Explorer, right click on your USB drive, and click 'Properties'. Alfred windows 10.

A window will pop up and you should see that the file system is now FAT32:

How to use Rufus to format a USB drive to FAT32

If your USB drive is larger than 32 GB, you'll need to use a third-party program like Rufus to format it.

There are lots of other programs that can format USB drives, but Rufus is really small and portable. This means you can stick Rufus right on a USB drive, plug it into any Windows computer, and format other drives on the go.

After you download Rufus, double click on the .exe file to start the application.

Make sure your USB drive is selected. Then, click the 'Boot selection' dropdown and select 'Non bootable':

Next, click the 'File system' dropdown and select 'FAT32'.

Also, feel free to change the name of your USB drive under 'Volume label':

Then, click the 'Start' button to format your drive. After a few seconds it'll be formatted to FAT32.

How to use PowerShell to format a USB drive to FAT32

While this method works with drives larger than 32 GB, it's really slow – even formatting a 32 GB drive can take up to an hour depending on your computer.

But, if you aren't able to use the previous two methods for some reason, this will work in a pinch.

First, click on the Windows Search Bar and type in 'powershell'. Then, click 'Run as administrator' to launch PowerShell with elevated privileges:

In the PowerShell terminal, enter the following command:

format /FS:FAT32 DRIVE_LETTER:

Use the File Explorer to double check your drive letter. My drive letter was D, so I entered format /FS:FAT32 D:.

Press Enter, make sure your USB drive is plugged in, and press the Enter key again to start the process:

Then go run some errands or something – it will take awhile.

Why Format Your Hard Drive

Once the format command is finished, your drive should be formatted to FAT32.

How To Format C Drive Windows 10

In closing

Now you should be able to format a USB drive of any size to FAT32 on Windows 10. And with just a little modification, any of these methods can be used to format your drive to another file system like NTFS or ExFAT.

Format Disk In Drive D Windows 10

Now get out there and format all your USB drives. (But only after you backup everything important!)

Was this helpful? Is there a better method that you know of? Tweet at me and let me know how you format things on Windows 10.